Service products

Textar Cera Tec
METAL-FREE PERMANENT LUBRICANT
The metal-free permanent lubricant by Textar for brake systems is highly temperature-resistant (up to 1,000°C).

The advantages of Cera Tec:
- Non-conductive
- Contains no solids
- Suitable for ABS
- Facilitates brake installation
- Reduces brake squealing
- Protects against scoring and corrosion
- Free of copper and acids
- Pressure-resistant / high viscosity
Cera Tec is suitable for lubricating:
- Disc- and drum-brake systems
- Compressors
- Centralised lubrication systems
- Axle bearings
- Chains
- Seat rails
- Sunroof tracks
- Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections.
Available in:
75 ml tubes and
5 ml sachets
Article number:
75 ml tubes: 81000400
5 ml sachets: 81000500
Minimum order quantity:
75 ml: 36 tubes
5 ml: 1.500 sachets
Sales unit:
75 ml: 36 tubes
5 ml: 1.500 sachets
Textar Hydra Tec
LUBRICANT FOR MAINTENANCE WORK AND PROTECTION
For moving parts in brake and clutch systems.
The advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.

Available in
180 ml tubes
Article number:
81001400
Minimum order quantity:
10 tubes
Sales unit:
10 tubes
Textar brake cleaner
FORMULA XT
The brake cleaner by Textar is a reliable way of removing oil, grease and dirt without leaving any residues.

Textar brake cleaner cleans all:
- Brake, clutch and gear components
- Starter motors and alternators
- Carburettor, fuel pumps and engine components
- Glass and metal surfaces before gluing
The advantages of Textar brake cleaner:
- Does not attack polystyrene
- Free of chlorinated solvents
- Registered with the German Federal Ministry for the Environment
Application:
Spray a generous amount on the parts to be cleaned. Let the solvent drip off or evaporate. Repeat the process for heavy soiling.