Service products

Service products

Textar Cera Tec

METAL-FREE PERMANENT LUBRICANT

The metal-free permanent lubricant by Textar for brake systems is highly temperature-resistant (up to 1,000°C).

The advantages of Cera Tec:
  • Non-conductive
  • Contains no solids
  • Suitable for ABS
  • Facilitates brake installation
  • Reduces brake squealing
  • Protects against scoring and corrosion
  • Free of copper and acids
  • Pressure-resistant / high viscosity
Cera Tec is suitable for lubricating:
  • Disc- and drum-brake systems
  • Compressors
  • Centralised lubrication systems
  • Axle bearings
  • Chains
  • Seat rails
  • Sunroof tracks
  • Battery terminals
Application:

Apply a thin layer of Cera Tec on the marked sections.

Available in:
75 ml tubes and
5 ml sachets
Article number:
75 ml tubes: 81000400
5 ml sachets: 81000500
Minimum order quantity:
75 ml: 36 tubes
5 ml: 1.500 sachets
Sales unit:
75 ml: 36 tubes
5 ml: 1.500 sachets

Textar Hydra Tec

LUBRICANT FOR MAINTENANCE WORK AND PROTECTION

For moving parts in brake and clutch systems.

The advantages of Hydra Tec:
  • Facilitates the installation of hydraulic brake components
  • Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
  • Free of mineral oils and compatible with EPDM rubber
  • In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
  • Cylinder running surfaces
  • Pistons
  • Sealing elements
Application:

Apply a thin layer of Hydra Tec on the marked sections.

The paste should be applied thinly and evenly. Never use mineral oils or greases containing mineral oils as substitutes. Do not apply the product on friction surfaces of brake pads or brake disc.

Available in
180 ml tubes
Article number:
81001400
Minimum order quantity:
10 tubes
Sales unit:
10 tubes

Textar brake cleaner

FORMULA XT

The brake cleaner by Textar is a reliable way of removing oil, grease and dirt without leaving any residues.

Textar brake cleaner cleans all:
  • Brake, clutch and gear components
  • Starter motors and alternators
  • Carburettor, fuel pumps and engine components
  • Glass and metal surfaces before gluing
The advantages of Textar brake cleaner:
  • Does not attack polystyrene
  • Free of chlorinated solvents
  • Registered with the German Federal Ministry for the Environment
Application:

Spray a generous amount on the parts to be cleaned. Let the solvent drip off or evaporate. Repeat the process for heavy soiling.

Available in
500 ml spray cans
Article number:
96000100
Minimum order quantity:
72 cans
Sales unit:
12 cans